Skip to content

Learn

Pack and load the van in reverse stop order (LIFO)

Load the van last stop first so the first porch is at the door. Number the pack list from the stop order, then load the last stop deepest. Porch Routes gives you that stop order and a link each driver opens in the phone’s browser. You still choose the load.

Last updated 6 min readBy Porch Routes

What is reverse stop order for a delivery van?

Reverse stop order means the last stop on the route goes into the van first, and the first stop stays at the door. Drivers call it LIFO: last in, first out. The box for porch 1 is the one you can reach when you open the doors, not the one buried under the rest of the day.

Porch Routes sequences the stops. It does not pack the van, and it does not reverse the physical load for you. You take the stop numbers and load against them. The list those numbers come from should already be locked, which is the point of a firm weekly order cutoff.

Why does a first-in load bury the first porch?

If you load in the order you packed, the first box in is the first porch, and every later box sits in front of it. At stop 1 the driver pulls half the van onto the curb, delivers one share, and stacks the rest again. That happens at every stop until the load shrinks.

  • The door is the working edge. The next box should be the next stop, not a search.
  • Cold stays shut. Digging for a buried box holds the doors open on a frozen or refrigerated load.
  • Labels match the route. A stop number on the box is only useful if the load follows those numbers.
  • Seasonal help can follow a list. They should not have to know the neighborhood to find the next share.

How do I key the pack list to stop numbers?

Build the route before you finish labeling. The pack list should carry the same stop numbers the driver will see, in reverse for the person loading. Pack last stop first, or pack in any order and load last stop first. Do not label from the order the shares were packed if that order is not the route.

  1. Build the route

    Import the locked stops and build them on the vans you will load. Frozen orders stay on frozen-capable vehicles. Refrigerated orders stay on refrigerated-capable vehicles. The stop numbers on the finished route are the numbers the pack list should use.

  2. Key the pack list to those numbers

    Write the route and the stop number on each box. Line items stay with that stop. A side that belongs with a share gets the same stop number, not a spare slot at the door.

  3. Load last stop first

    Put the highest stop number in first, against the cab, and work down to stop 1 at the door. Respect each vehicle’s weight capacity and stop limit when you set them. If a stop does not fit, leave it unassigned and pack it on a van that has room, rather than stacking it on anyway.

  4. Print the run sheet and the load list

    Print a run sheet per route with every stop and line item, and a load list to check the van before it leaves. The load list is the check that the door box is stop 1.

  5. Send each driver a link

    Send each driver a link. It opens in the phone’s browser, with no app to install, so the stop order in the hand matches the load. See farm delivery driver link, no app.

Does temperature still choose the van?

Yes. Loading last stop first does not put a frozen box on a dry van because that porch is next. Temperature is a hard rule: a frozen order rides a frozen-capable vehicle, and a refrigerated order rides a refrigerated-capable vehicle. A stop that does not have a capable van stays unassigned.

USDA’s mail-order guidance says perishable food should arrive frozen, partly frozen, or refrigerator cold, below 40°F. Reverse loading keeps the doors from staying open while someone hunts for a box. It does not replace a vehicle that can hold that temperature. The same rule is spelled out in why frozen can’t ride the dry truck.

What does a worked load look like?

Say one van has 12 stops, numbered 1 to 12 after the route is built. The loader starts with stop 12 at the back of the pile and ends with stop 1 at the door. At the first porch the driver takes the box that is already in reach, and stop 2 is the new door box. Nothing in that story requires the software to move a crate. The software’s job was the numbering.

If two of those 12 are frozen and the van is dry, those two do not get stop numbers on this van. They wait for a frozen-capable vehicle, with their own stop order and their own last-in load. Mixing them in because the driveway was close is the mistake the temperature rule is there to stop.

What can you print and send on Porch Light?

Porch Light is free up to 150 orders a month on 1 vehicle with no credit card. That is enough to build a route, print the run sheet and the load list, and send each driver a link. Paid plans have no fee per driver or vehicle. There is no saved route-template feature yet, so next week you import the locked orders and build again. See pricing.

Questions

What does reverse stop order mean?

The last stop is loaded first and the first stop stays at the door. The driver can reach the next porch without unloading the rest of the van.

Why not load the van in the order you packed?

The first box in becomes the hardest box to reach. Every stop then starts with a search, and a cold load sits with the doors open.

Does Porch Routes pack the van for me?

No. It builds the stop order. You key the pack list to those numbers and load last stop first. There is no automatic reverse-load step.

How should the pack list use stop numbers?

Build the route first, then write that route’s stop number on each box, including the line items that belong with it. Load from the highest number down to stop 1.

Can a frozen order ride the next van if that porch is close?

Only if that van can carry frozen. Temperature still chooses the vehicle. Reverse loading never overrides it. A stop without a capable van stays unassigned.

What should I print before the van leaves?

A run sheet per route with every stop and line item, and a load list to check that the box at the door is the first stop.

How does the driver get the stop order?

Send each driver a link. It opens in the phone’s browser, with no app to install. The order on the phone should be the order you loaded.

Can I save last week’s load as a template?

No. There is no saved route-template feature yet. Import the locked orders, build again, and load from the new stop numbers.

Sources

  1. USDA FSIS: Mail order food safety (perishables below 40°F) · seen 10 November 2026

Plan your next delivery day in a few minutes.

Add your vehicles and a day of orders — by hand, from a CSV or over the API — and build your first routes.

Free up to 150 orders a month · No credit card